The search for leaks.

-
Initially the boat was always having some water in the bilge. It was clear the forward ports were in urgent need of replacement. Also hatch on the bow was leaking. Although the Bierkaai was constructed in ’81 all the parts are still available on the US market. Went on internet and found the exact same type of ports I needed.
Actually, after having changed out the ports and the forward hatch, the water influx continued and the forward cabin still was damp.
This is how the original port looked like.
It still needs some trimming.
The final result:



Next step was to glue the bow hatch again:




Other changes done, make a cover for the hole in the bathroom and change out the toilet.






Comments

Post a Comment

Popular posts from this blog

Some history, from Ganbare to Peterson 34

-
Image
First some history about the Peterson 34 pedigree, the “ Ganbare” (good luck in Japanese). “Ganbare”, the famous one tonner of Doug Peterson is an unforgettable milestone of the yachting history : Like “America” and “Dorade”, “Ganbare” of 1973 changed the yacht design, and since than the racing yachts (but also the cruisers) took inspiration from her hull. It is a very simple and small boat built on budget, but her easy lines, and her light and strong construction marked the step. During the One Ton Cup of 1973, in Sardinia Italy, even in a breeze "Ganbare" was fast, and went on to finish first in four of the five races. But such a dominant display was not to be rewarded with the Cup itself, as a navigation error in the middle distance ocean race saw Peterson and his crew finished second overall, Peterson achieved what was termed at the prizegiving as a moral victory, Ganbare was sold before the series ended. Since that race, "Ganbare" won ...
Read more

From GRAZINA to BIERKAAI

-
Image
When I purchased the Grazina in January 2016, it was laying in Santos, SP.  Here the photos when I went to Santos to look at the boat and have a test sail. As the Peterson 34 is a real pleasure to sail and it very well constructed it was not a difficult to make the final decision. As part of the registration I decided to also change the name of the boat. It had already been changed at least twice, so if it would mean bad luck, something would have happened to it by now. In Brazil, changing the name is actually easier said than done, as the Navy does not allow to have  vessels with the same name. Therefore I ended up choosing a name which I knew for sure no vessel in Brazil would have, “Bierkaai”. What does the name “Bierkaai” mean and what does it stand for. It happens to be that my surname in Dutch means “brewer”, like the one making beer. There is a Dutch proverb  ” fighting against de bierkaai” which means you...
Read more

Rudder - the final part, tiller installation

-
Image
The end of the year the project has been slower. The end of January I took ten 10 days of in order to be able to complete the final parts. One of the critical details was the installation of the new tiller head. The original one was actually only made for the emergency tiller and was very weak. The thickness of the SS was very thin and only the side plates were passing the forces to the shaft. The differences with the new tiller head is clear. Also the end of the tiller had to be made wider.    This is how it looks installed.   Just to get an impression of how it will look with the tiller installed (which still had to receive the last varnish coating).  
Read more