Teak and Holly - upgrade of the floor plates

-
Initially the plan was just to give the floor plates a new coat of varnish. They were sanded, as seen on the photo above, and given a new coating.
The result was not that good and also it was clear 2 floor plates needed repair, because some part was partially rotten.
The orange colored plate was worse and it was tried to make a new plate, but the color was way off and also it started to curve.
    
The end result after the plates were vanished again.
  
The 2 plates which had to be replaced.
To replace them is easier said than done. This type of floor is called "Teak and Holly". Originally these were larger strips of teak which a smaller strip of a lighter wood. Nowadays this is available in plywood or even veneer.
 
Teak and Holly or prefabbed plywood
Of course this is not available in Brazil. To make complete new floor plates would be very expensive and even to find somebody able to do so would be difficult.
Therefore the choice was to purchase a product called HPL from Holland. It is plastic laminate, but looks like real wood and is very durable. To only problem is that is very easy to crack when transported. Therefore a risk to take it on a plane. Risk taken and a colleague was willing to bring it with him on the plane.
Sheet of HPL, the one chosen was Mahogany.
Here you can see the result:
      
Before.
  
After.
  

  

  

Comments

Post a Comment

Popular posts from this blog

Some history, from Ganbare to Peterson 34

-
Image
First some history about the Peterson 34 pedigree, the “ Ganbare” (good luck in Japanese). “Ganbare”, the famous one tonner of Doug Peterson is an unforgettable milestone of the yachting history : Like “America” and “Dorade”, “Ganbare” of 1973 changed the yacht design, and since than the racing yachts (but also the cruisers) took inspiration from her hull. It is a very simple and small boat built on budget, but her easy lines, and her light and strong construction marked the step. During the One Ton Cup of 1973, in Sardinia Italy, even in a breeze "Ganbare" was fast, and went on to finish first in four of the five races. But such a dominant display was not to be rewarded with the Cup itself, as a navigation error in the middle distance ocean race saw Peterson and his crew finished second overall, Peterson achieved what was termed at the prizegiving as a moral victory, Ganbare was sold before the series ended. Since that race, "Ganbare" won in the Me
Read more

From GRAZINA to BIERKAAI

-
Image
When I purchased the Grazina in January 2016, it was laying in Santos, SP.  Here the photos when I went to Santos to look at the boat and have a test sail. As the Peterson 34 is a real pleasure to sail and it very well constructed it was not a difficult to make the final decision. As part of the registration I decided to also change the name of the boat. It had already been changed at least twice, so if it would mean bad luck, something would have happened to it by now. In Brazil, changing the name is actually easier said than done, as the Navy does not allow to have  vessels with the same name. Therefore I ended up choosing a name which I knew for sure no vessel in Brazil would have, “Bierkaai”. What does the name “Bierkaai” mean and what does it stand for. It happens to be that my surname in Dutch means “brewer”, like the one making beer. There is a Dutch proverb  ” fighting against de bierkaai” which means you are setting yourself up
Read more

Rudder - the final part, tiller installation

-
Image
The end of the year the project has been slower. The end of January I took ten 10 days of in order to be able to complete the final parts. One of the critical details was the installation of the new tiller head. The original one was actually only made for the emergency tiller and was very weak. The thickness of the SS was very thin and only the side plates were passing the forces to the shaft. The differences with the new tiller head is clear. Also the end of the tiller had to be made wider.    This is how it looks installed.   Just to get an impression of how it will look with the tiller installed (which still had to receive the last varnish coating).  
Read more